$7,652.20

This custom kit is designed to provide a ready to go Maker Space for High School students looking to get started with Arduinos and programming. While not all components work directly with Arduino they are all designed for High School students and should all work well with an Arduino curriculum.

SKU: PL-SU-Spark_HS_arduino Category:
  • LilyPad ProtoSnap Plus Lab Pack
  • LilPad ProtoSnap Plus x10
  • LilyPad USB Plus
  • LilyPad Light Sensor
  • LilyPad Buzzer
  • LilyPad Button
  • LilyPad Switch
  • LilyPad LED – Yello x2
  • LilyPad LED – Red x2
  • LilyPad LED – Green x2
  • LilyPad LEDD – Blue x2
  • LilyPad Rainbow LED x10
  • Needle Set x10
  • USB micro-B Cable – 6ft x10
  • 110mAh LiPo Battery x10
  • Multicolored Alligator Clip – 10-pack x10
  • Conductive Thread Bobbin x20
  • SIK LabPack v 4.0 x3
  • SparkFun Inventor’s Kit – v4.0 x10
  • SparkFun RedBoard
  • Arduino and Breadboard Holder
  • SparkFun Inventor’s Kit Guidebook
  • White Solderless Breadboard
  • Carrying Case
  • SparkFun Mini Screwdriver
  • 16×2 White-on-Black LCD (with headers)
  • SparkFun Motor Driver (with Headers)
  • Pair of Rubber Wheels
  • Pair of Hobby Gearmotors
  • Small Servo
  • Ultrasonic Sensor
  • TMP36 Temp Sensor
  • 6′ SparkFun USB Cable
  • Jumper Wires
  • Photocell
  • Tricolor LED
  • Red, Blue, Yellow and Green LEDs
  • Red, Blue, Yellow and Green Tactile Buttons
  • 10K Trimpot
  • Mini Power Switch
  • Piezo Speaker
  • AA Battery Holder
  • 330 Resistors x20
  • 10K Resistors x20
  • Binder Clip
  • Dual-Lock™ Fastener
  • SparkFun Inventor’s Kit Refill Pack – v1.0
  • Adjustable Parts Box
  • Mini Speaker x2
  • Temerature Sensor – TMP36 x2
  • Mini Photocell x2
  • Trimpot 10k x2
  • Mini Power Switch – SPDT x2
  • Generic Servo (Sub-MiroSize) x2
  • Assorted LED 2-pack (5 Red, 5 Blue, 5 Yellow, 5 Green)
  • Multicolor Button 4-pack (Red, Blue, Yellow, Green) x2
  • Alkaline Batteries – AA x50
  • Paper Circuits Classroom Pack x2
  • Printed Robot Template Card x30
  • Red LED – 5mm x30
  • Blue LED – 5mm x30
  • Yellow LED – 5mm x30
  • Green LED – 5mm x30
  • Coin Cell Battery – CR2032 x30
  • Copper Tape – 1ft x30
  • Copper Tape – 50ft roll x1
  • Binder Clip x30
  • Digilent Analog Discovery 2 x2
  • Power Supply – 80W DC Switching Mode x2
  • Sensor Kit x5
  • Large Piezo Vibration Sensor – With Mass
  • Reed Switch
  • 0.25″ Magnet Square –
  • 0.5″ Force Sensitive Resistor
  • PIR Motion Sensor
  • Mini Photocell
  • QRD1114 Optical Detector/Phototransistor
  • Altitude/Pressure Sensor – MPL3115A2 Breakout
  • Flex Sensor
  • SoftPot
  • 9 Degrees of Freedom IMU Breakout – LSM9DS1
  • RGB and Gesture Sensor – APDS-9960
  • Humidity and Temperature Sensor – Si7021
  • Soil Moisture Sensor (with screw terminals)
  • Capacitive Touch Breakout
  • Sound Detector
  • IR Receiver Diode
  • IR Diode
  • Resistor 10K Ohm 1/6th Watt PTH – 20 Pack
  • Resistor 1.0M Ohm 1/4 Watt PTH
  • Resistor 330 Ohm 1/6W PTH – 20 pack –
  • SparkFun Inventor’s Kit for RedBot x5
  • SparkFun RedBot Mainboard
  • Shadow Chassis
  • SparkFun RedBot Sensor – Accelerometer
  • SparkFun RedBot Sensor – Mechanical Bumper x2
  • SparkFun RedBot Sensor – Line Follower x3
  • SparkFun RedBot Buzzer
  • Hobby Gearmotor – 140 RPM x2
  • Wheel – 65mm (Rubber Tire) x2
  • Wheel Encoder Kit
  • Jumper Wire – 3-pin, 6″ x5
  • SparkFun USB Mini-B Cable – 6 Foot
  • SparkFun Mini Screwdriver
  • AA Alkaline Battery – 1500 mAh x4
  • Beginner Parts Kit x5
  • Adjustable Parts Box
  • 0.1uF Cap x10
  • 100uF Cap x5
  • 10uF Cap x5
  • 1uF Cap x5
  • 10nF Cap x5
  • 1nF Cap x5
  • 100pF Cap x5
  • 10pF Cap x5
  • 1N4148 Diode x5
  • 1N4001 Diode x5
  • 2N3906 PNP Transistor x5
  • 2N3904 NPN Transistor x5
  • 20-pin Female Header x3
  • 20-pin Male Header x3
  • Mini Power Switch x3
  • Push Buttons x2
  • 10K Trimpot x1
  • LM358 OpAmp x2
  • 3.3V Regulator x2
  • 5V Regulator x2
  • 555 Timer
  • Green LED
  • Yellow LED
  • Red LED
  • 7-Segment Red LED
  • Mini Photocell
  • Deluxe Tool Kit x5
  • Weller WLC100 Soldering Station
  • Heaterizer XL-3000 Heat Gun
  • Digital Multimeter – Basic
  • Insulated Silicone Soldering Mat
  • SparkFun Third Hand Kit
  • Pocket Screwdriver Set
  • Monocle Magnifier – Illuminated
  • Solder – 1/4lb Spool (0.032in.) Special Blend
  • Solder Wick #2 5ft. – Generic x2
  • Solder-Mate Solder Dispenser
  • Soldering Tip – Weller – Standard (ST1)
  • Solder Tip Tinner and Cleaner
  • Chip Quik No-Clean Flux Pen – 10mL
  • Hook-Up Wire – Assortment (Solid Core, 22 AWG)
  • Heat Shrink Kit
  • Wire Strippers – 22-30AWG
  • Flush Cutters – Xcelite
  • Needle Nose Pliers
  • Tweezers – Straight (Cross-Lock, ESD Safe)
  • Tweezers – Curved (ESD Safe)
  • Hobby Knife
  • SparkFun Safety Glasses
  • Water Bottle – 2oz
  • Simon PTH Kit x30
  • 1x ATmega328 – pre-programmed with Simon firmware
  • 1x Buzzer
  • 2x 0.1μF Cap
  • 1x 10K Resistor
  • 4x LEDs (blue, yellow, red, green)
  • 2x Slide Switch
  • 4x Battery Clips
  • 2x AA Batteries
  • 1x Button pad
  • 1x Bezel
  • 4x Standoffs and screws
  • 1x Assembly instructions
  • Needle Nose Pliers
  • SparkFun Safety Glasses
  • Water Bottle – 2oz

SparkFun_Inventors_Kit_Guide_V4.0a

SIK_4.0a_Errata

SIK v4a Book WEB Low Res

SIKV4_Case_Dimensions

 SIK_Case_Inserts-master

filed under: